Publications

High-rate biological selenate reduction in a sequencing batch reactor for recovery of hexagonal selenium

Song, B.; Tian, Z.; Weijden, R.D. van der; Buisman, C.J.N.; Weijma, J.

Summary

Recovery of selenium (Se) from wastewater provides a solution for both securing Se supply and preventing Se pollution. Here, we developed a high-rate process for biological selenate reduction to elemental selenium. Distinctive from other studies, we aimed for a process with selenate as the main biological electron sink, with minimal formation of methane or sulfide. A sequencing batch reactor, fed with an influent containing 120 mgSe L−1 selenate and ethanol as electron donor and carbon source, was operated for 495 days. The high rates (419 ± 17 mgSe L−1 day−1) were recorded between day 446 and day 495 for a hydraulic retention time of 6 h. The maximum conversion efficiency of selenate amounted to 96% with a volumetric conversion rate of 444 mgSe L−1 day−1, which is 6 times higher than the rates reported in the literature thus far. At the end of the experiment, a highly enriched selenate reducing biomass had developed, with a specific activity of 856 ± 26 mgSe−1day−1gbiomass−1, which was nearly 1000-fold higher than that of the inoculum. No evidence was found for the formation of methane, sulfide, or volatile reduced selenium compounds like dimethyl-selenide or H2Se, revealing a high selectivity. Ethanol was incompletely oxidized to acetate. The produced elemental selenium partially accumulated in the reactor as pure (≥80% Se of the total mixture of biomass sludge flocs and flaky aggregates, and ~100% of the specific flaky aggregates) selenium black hexagonal needles, with cluster sizes between 20 and 200 µm. The new process may serve as the basis for a high-rate technology to remove and recover pure selenium from wastewater or process streams with high selectivity.